Products >> Wireless Network Devices >> Wireless AP

Indoor ceiling access point AP 750Mbps dual band

Indoor ceiling access point AP 750Mbps dual band

Product No.：SST-270CA
Online Inquiry

SST-270CA 11ac Ceiling Wireless Access Points equipped with Qualcomm Chipset, it is specifically designed to operate in
Residential and commercial applications. Comply with IEEE 802.11ac/n/g/b standard, it is 2.4GHz and 5GHz dual radio,
with data rate up to 750Mbps(300Mbps in 2.4G, 433Mbps in 5G), enable users to enjoy more stable and faster Ethernet
surfing even access into 80+ end users.

Designed in two line Power Amplifier and Low Noise Amplifier on PCB board, the power can be 800mW high power, 5dBi
MIMO high gain antenna, greatly increased the wifi range and reduced the noise interference. It also supports intelligent
channel analysis and automatic selection of optimal channels to reduce interference and delay and provide stable wireless
network signals.

Dual band high speed with MU-MIMO Wave2 technology, fit for many environments which request for multiple users access,
like airport/ pier/ school/ station/ meeting hall.

In addition, the BL270Q has integrated IEEE 802.3at standard Power over Ethernet (PoE), can achieve 100+ meters network
cable power supply, housed in a stylish ceiling mountable case, for easy installation and lower cost.

Based on CAPWAP protocol, centralized managed by WLAN control, plug and play, simple operation, zero configuration in
large quantity installation. What’s more, it can access into cloud server for remote management.

Product Feature：

1.802.11ac MU-MIMO Wave-2 Technology, faster and more internet access.

2.AP supports VLAN management across three layers.

3.Support Multi SSID, SSID VLAN isolation.

4.Seamless roaming, load balancing.

5.Spectrum navigation, 5G priority.

6.Separation of business and management IP.

7.AP alarm and rescue, AP tracking.

Model	SST-270CA
Hardware
Interfaces	10/100Mbps LAN*2
Data Rate	750Mbps
Frequency Range	2.4G：2400Mhz～2483Mhz 5.8G：5100Mhz～5900Mhz
Standards	IEEE802.11ac Wave-2 /a/b/g/n
Modulation Type	OFDM/BPSK/QPSK/CCK/DQPSK/DBPSK
Wireless Transmit Power	11n 2.4G 25dBm（adjustable） 11n 5G 23dBm（adjustable） 11ac 2.4G 23dBm（adjustable） 11ac 5G 22dBm（adjustable）
Antenna	5dBi 2*2
Operating/Storage Temperature	Operating Temperature	-10～50℃
	Storage Temperature	-40～70℃
	Humidity	≤90%（Non-condensing）
Power Supply	48V PoE（IEEE802.3af/at）
Power Consumption	≤15W
Installation	Ceiling Mounted
Dimensions	18818840mm
Weight	0.5kg
Software
Recommend Users	80（best user experience）
Userlimit	Support
Timing Reboot	Support
Power adjustment	Support
Channel selection	Support
Virtual AP	Support，Up to 8 SSID
Multi SSID	Support
SSID hidden	Support
RF disabled	Support
Spectrum navigation	Support，5G priority
SSID VLAN	Support
AP tracking	Support
AP alarm and rescue	Support，When the wireless AP detects some abnormalities and cannot recover, it releases a rescue SSID signal starting with “SOS” and ending with the the last six digits of the AP’s MAC address; the wireless network maintenance personnel can log in to the AP by connecting the rescue SSID, and diagnose the fault with one button.
Channel optimization	Support
Load balancing	Support
Seamless roaming	Support
AP Online Update	Support
Cloud AC management	Support
Local AC	Support
AC Offline	Support，Communication between AC and AP is interrupted, Internet access is not affected, and users are not aware.
Grouping management	Support AP Grouping management
IP batch modification	Support，The management IP of the AP can be modified in batches in the AC.
Password bulk modification	Support, AP login password can be modified in batches in AC
Maintenance mode	Support local maintenance and cloud maintenance
System Login	Default IP Address：6.6.6.6 Password：admin